Back

TOPROCK® DD Plus is a high-density bitumen-coated stone wool insulation board for low-slope roof applications

TOPROCK^® DD Plus is compatible as the substrate for the following membrane attachment types:

torched
hot-mopped

The product has excellent acoustic properties and can be used either as a top layer of thermal insulation in an acoustic assembly with TOPROCK^® DD or as the top layer of a hybrid roof assembly with polyisocyanurate or other roof insulations.

Properties:

Non-combustible, meeting FM 4470 NCC (Non-Combustible Core) Rating
Will not warp or cup
Dimensionally stable—provides a long-term, consistent thermal performance
High impact resistance
Excellent acoustic reduction, absorption and impact (rain noise) performance
Made from natural & recycled materials
ROCKWOOL^® can contribute to earning LEED^® points

BIM Solution Finder

With BIM becoming invaluable within the construction industry, the importance of accessing the most up-to-date BIM data has been increasingly crucial.

Access BIM finder

Back

Compliance

ASTM C726 - FM 4470

ASTM C726***	Standard Specification for Mineral Fiber Roof Insulation Boards
FM 4470	Approval Standard for Single-Ply, Polymer Modified Bitumen Sheet, Built-Up Roof and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
FM 4470	NCC (Non-Combustible Core) Rated Roof Insulation
FM Approved
ULC Listed
Classified UL
Miami Dade County Approved

Density

ASTM C303

ASTM C303	Top Layer - 13.75 lb/ft³ (220 kg/m³)
ASTM C303	Bottom Layer - 10 lb/ft³ (160 kg/m³)
ASTM C303	Bottom Layer - 9.36 lb/ft³ (150 kg/m³) (for thicknesses >2.5" (63.5 mm))

Dimensional stability

ASTM C356 - ASTM D2126

ASTM C356	Linear Shrinkage - 0.71% @ 1200°F (650°C)
ASTM D2126	Linear Change 7 days @ -40°F (-40°C), ambient RH - 0.1%
ASTM D2126	Linear Change 7 days @ 200°F (93°C), ambient RH - 0.1%
ASTM D2126	Linear Change 7 days @ 158°F (70°C), 97% RH - 0.0%

Dimensions

48" x 48" (1219 mm x 1219 mm)

Thickness

Product available in 2" – 6" (50.8mm – 152.4 mm) in 1/2" (12.7 mm) increments

Reaction to fire

ASTM E84 (UL 723) - CAN/ULC S102 - CAN/ULC S114 - NFPA 276 - CAN/ULC S107-03 - CAN/ULC S126-06 - UL 790 (ASTM E108) - UL 263 (ASTM E119)

ASTM E84 (UL 723)	Flame spread index = 0 ; Smoke developed index = 0
CAN/ULC S102	Flame spread index = 0 ; Smoke developed index = 0
CAN/ULC S114	Determination of Non-Combustibility of Building Materials - Non-Combustible
NFPA 276	Standard Method of Fire Tests for Determining Heat Release Rate of Roofing Assemblies with Combustible Above Deck Roofing Components - Class 1
CAN/ULC S107-03	Fire Tests of Roof Coverings - Class A
CAN/ULC S126-06	Fire Spread under Roof Deck Assemblies - See ULC Directory
UL 790 (ASTM E108)	Standard Test Methods for Fire Tests of Roof Coverings - Class A
UL 263 (ASTM E119)	Fire Tests of Building Construction and Materials - See UL Directory

Thermal resistance

ASTM C518 (C177)

Mean Temperature	R-Value	RSI Value
75°F (24°C)	3.8 hr.ft².F/Btu	0.68 m²K/W
25°F (-4°C)	4.3 hr.ft².F/Btu	0.74 m²K/W
40°F (4°C)	4.2 hr.ft².F/Btu	0.72 m²K/W
110°F (43°C)	3.6 hr.ft².F/Btu	0.64 m²K/W

Acoustical Performance

ASTM C423 - ASTM E90

	Thickness	125 Hz	250 Hz	500 Hz	1000 Hz	2000 Hz	4000 Hz	NRC
ASTM C423	2"	0.5	0.71	0.85	0.9	0.96	1.01	0.85
ASTM E90	Contact ROCKWOOL for STC rated assemblies

Reaction to moisture

ASTM C1104 - ASTM C209 - ASTM E96

ASTM C1104	Moisture Sorption - 0.15%
ASTM C209	Water Absorption - <1.0%>
ASTM E96	Water Vapor Transmission, Desiccant Method - 2330 ng/Pa.s.m² (41 perm)

Compressive strength

ASTC C165 - EN 12430

ASTC C165	Top Layer - 20 psi (140 kPa) @ 10%, 37 psi (250 kPa) @ 25%
ASTC C165	Entire Board - 11 psi (75 kPa) @ 10%, 15 psi (105 kPa) @ 25%
EN 12430	Point Load @ 5 mm Compression - 30 psi (205 kPa)

Corrosion Resistance

ASTM C795 - ASTM C665

ASTM C795	Stress Corrosion Cracking Tendency of Austenitic Stainless Steel - Passed
ASTM C665	Corrosion of Steel - Passed

Back

ASTM C726***	Standard Specification for Mineral Fiber Roof Insulation Boards
FM 4470	Approval Standard for Single-Ply, Polymer Modified Bitumen Sheet, Built-Up Roof and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
FM 4470	NCC (Non-Combustible Core) Rated Roof Insulation
FM Approved
ULC Listed
Classified UL
Miami Dade County Approved

Back

ASTM C303	Top Layer - 13.75 lb/ft³ (220 kg/m³)
ASTM C303	Bottom Layer - 10 lb/ft³ (160 kg/m³)
ASTM C303	Bottom Layer - 9.36 lb/ft³ (150 kg/m³) (for thicknesses >2.5" (63.5 mm))

Back

ASTM C356	Linear Shrinkage - 0.71% @ 1200°F (650°C)
ASTM D2126	Linear Change 7 days @ -40°F (-40°C), ambient RH - 0.1%
ASTM D2126	Linear Change 7 days @ 200°F (93°C), ambient RH - 0.1%
ASTM D2126	Linear Change 7 days @ 158°F (70°C), 97% RH - 0.0%

Back

48" x 48" (1219 mm x 1219 mm)

Back

Product available in 2" – 6" (50.8mm – 152.4 mm) in 1/2" (12.7 mm) increments

Back

ASTM E84 (UL 723)	Flame spread index = 0 ; Smoke developed index = 0
CAN/ULC S102	Flame spread index = 0 ; Smoke developed index = 0
CAN/ULC S114	Determination of Non-Combustibility of Building Materials - Non-Combustible
NFPA 276	Standard Method of Fire Tests for Determining Heat Release Rate of Roofing Assemblies with Combustible Above Deck Roofing Components - Class 1
CAN/ULC S107-03	Fire Tests of Roof Coverings - Class A
CAN/ULC S126-06	Fire Spread under Roof Deck Assemblies - See ULC Directory
UL 790 (ASTM E108)	Standard Test Methods for Fire Tests of Roof Coverings - Class A
UL 263 (ASTM E119)	Fire Tests of Building Construction and Materials - See UL Directory

Back

Mean Temperature	R-Value	RSI Value
75°F (24°C)	3.8 hr.ft².F/Btu	0.68 m²K/W
25°F (-4°C)	4.3 hr.ft².F/Btu	0.74 m²K/W
40°F (4°C)	4.2 hr.ft².F/Btu	0.72 m²K/W
110°F (43°C)	3.6 hr.ft².F/Btu	0.64 m²K/W

Back

	Thickness	125 Hz	250 Hz	500 Hz	1000 Hz	2000 Hz	4000 Hz	NRC
ASTM C423	2"	0.5	0.71	0.85	0.9	0.96	1.01	0.85
ASTM E90	Contact ROCKWOOL for STC rated assemblies

Back

ASTM C1104	Moisture Sorption - 0.15%
ASTM C209	Water Absorption - <1.0%>
ASTM E96	Water Vapor Transmission, Desiccant Method - 2330 ng/Pa.s.m² (41 perm)

Back

ASTC C165	Top Layer - 20 psi (140 kPa) @ 10%, 37 psi (250 kPa) @ 25%
ASTC C165	Entire Board - 11 psi (75 kPa) @ 10%, 15 psi (105 kPa) @ 25%
EN 12430	Point Load @ 5 mm Compression - 30 psi (205 kPa)

Back