FIREPRO® SoftSeal Linear Joint Seal
FIREPRO® SoftSeal Linear Joint Seal is designed to fire stop linear joint seals in buildings where movement is a factor in the design.
FIREPRO® SoftSeal Linear Joint Seal comprises medium density, lamella stone wool insulation, SoftSeal batt, pre-coated with SoftSeal Flexible Coating. It is designed for installation horizontally or vertically and can be applied to linear joint widths up to 300mm§. Where masonry walls finish below a suspended ceiling height there is significant risk of spread of flames and smoke, in addition to noise travelling between rooms day to day. FIREPRO® SoftSeal Linear Joint Seal can be used as a ‘head-of-wall’ barrier to extend the fire safety protection and acoustic performance properties of the walls.
FIREPRO® SoftSeal Linear Joint Seal has been tested to BS EN1366-4 and has been proven to provide up to 4 hours’ fire performance (E240 & EI180). It has also been assessed for its movement capabilities, tested to accommodate movement, expansion and contraction, of +/- 25%.
|NBS Clause||Length (mm)||Width (mm)||*Approved thickness range (mm)|
P12 Fire stopping systems
*Thickness options may be subject to a minimum production volume. Speak to the specification team for guidance.
Standards and Certification
|Product standards||EN 1366-4:2006+A1:2010, EN 13501-2|
|CE Marking||CE Marked to ETAG 026-3|
|Fire resistance||up to 4 hours (E240 & EI180)|
|Acoustic performance||40dB to EN10140|
|Water permeability||No Leakage up to 300Pa Tested to EN 1027|
|Airflow resistance||Air permeability Tested to EN1026 up to 600Pa. Leakage @50Pa 0.1/1.4m3/m2/h|
Tested to EN 10140 based on two thicknesses with the following results:
- Rw 30 dB: When installed with 100mm thick SoftSeal Batt
- Rw 39 dB: When installed with 200mm thick SoftSeal Batt
- Dn,e,w 40 dB: When installed with 100mm thick SoftSeal Batt
- Dn,e,w 49 dB: When installed with 200mm thick SoftSeal Batt
Download CAD Drawings here